
By Patrick Lester (Updated July 18, 2005)
This article has been translated from English into Albanian, Chinese, French, German, Greek, Polish, Portuguese, Russian, and Spanish. Other translations are welcome. See email address at the bottom of this article.
The A* (pronounced Astar) algorithm can be complicated for beginners. While there are many articles on the web that explain A*, most are written for people who understand the basics already. This article is for the true beginner.
This article does not try to be the definitive work on the subject. Instead it describes the fundamentals and prepares you to go out and read all of those other materials and understand what they are talking about. Links to some of the best are provided at the end of this article, under Further Reading.
Finally, this article is not programspecific. You should be able to adapt what's here to any computer language. As you might expect, however, I have included a link to a sample program at the end of this article. The sample package contains two versions: one in C++ and one in Blitz Basic. It also contains executables if you just want to see A* in action.
But we are getting ahead of ourselves. Let's start at the beginning ...
Introduction: The Search Area
Let’s assume that we have someone who wants to get from point A to point B. Let’s assume that a wall separates the two points. This is illustrated below, with green being the starting point A, and red being the ending point B, and the blue filled squares being the wall in between.
[Figure 1]
The first thing you should notice is that we have divided our search area into a square grid. Simplifying the search area, as we have done here, is the first step in pathfinding. This particular method reduces our search area to a simple two dimensional array. Each item in the array represents one of the squares on the grid, and its status is recorded as walkable or unwalkable. The path is found by figuring out which squares we should take to get from A to B. Once the path is found, our person moves from the center of one square to the center of the next until the target is reached.
These center points are called “nodes”. When you read about pathfinding elsewhere, you will often see people discussing nodes. Why not just call them squares? Because it is possible to divide up your pathfinding area into something other than squares. They could be rectangles, hexagons, triangles, or any shape, really. And the nodes could be placed anywhere within the shapes – in the center or along the edges, or anywhere else. We are using this system, however, because it is the simplest.
Starting the Search
Once we have simplified our search area into a manageable number of nodes, as we have done with the grid layout above, the next step is to conduct a search to find the shortest path. We do this by starting at point A, checking the adjacent squares, and generally searching outward until we find our target.
We begin the search by doing the following:
[Figure 2]
Next, we choose one of the adjacent squares on the open list and more or less repeat the earlier process, as described below. But which square do we choose? The one with the lowest F cost.
Path Scoring
The key to determining which squares to use when figuring out the path is the following equation:
F = G + H
where
Our path is generated by repeatedly going through our open list and choosing the square with the lowest F score. This process will be described in more detail a bit further in the article. First let’s look more closely at how we calculate the equation.
As described above, G is the movement cost to move from the starting point to the given square using the path generated to get there. In this example, we will assign a cost of 10 to each horizontal or vertical square moved, and a cost of 14 for a diagonal move. We use these numbers because the actual distance to move diagonally is the square root of 2 (don’t be scared), or roughly 1.414 times the cost of moving horizontally or vertically. We use 10 and 14 for simplicity’s sake. The ratio is about right, and we avoid having to calculate square roots and we avoid decimals. This isn’t just because we are dumb and don’t like math. Using whole numbers like these is a lot faster for the computer, too. As you will soon find out, pathfinding can be very slow if you don’t use short cuts like these.
Since we are calculating the G cost along a specific path to a given square, the way to figure out the G cost of that square is to take the G cost of its parent, and then add 10 or 14 depending on whether it is diagonal or orthogonal (nondiagonal) from that parent square. The need for this method will become apparent a little further on in this example, as we get more than one square away from the starting square.
H can be estimated in a variety of ways. The method we use here is called the Manhattan method, where you calculate the total number of squares moved horizontally and vertically to reach the target square from the current square, ignoring diagonal movement, and ignoring any obstacles that may be in the way. We then multiply the total by 10, our cost for moving one square horizontally or vertically. This is (probably) called the Manhattan method because it is like calculating the number of city blocks from one place to another, where you can’t cut across the block diagonally.
Reading this description, you might guess that the heuristic is merely a rough estimate of the remaining distance between the current square and the target "as the crow flies." This isn't the case. We are actually trying to estimate the remaining distance along the path (which is usually farther). The closer our estimate is to the actual remaining distance, the faster the algorithm will be. If we overestimate this distance, however, it is not guaranteed to give us the shortest path. In such cases, we have what is called an "inadmissible heuristic."
Technically, in this example, the Manhattan method is inadmissible because it slightly overestimates the remaining distance. But we will use it anyway because it is a lot easier to understand for our purposes, and because it is only a slight overestimation. On the rare occasion when the resulting path is not the shortest possible, it will be nearly as short. Want to know more? You can find equations and additional notes on heuristics here.
F is calculated by adding G and H. The results of the first step in our search can be seen in the illustration below. The F, G, and H scores are written in each square. As is indicated in the square to the immediate right of the starting square, F is printed in the top left, G is printed in the bottom left, and H is printed in the bottom right.
[Figure 3]
So let’s look at some of these squares. In the square with the letters in it, G = 10. This is because it is just one square from the starting square in a horizontal direction. The squares immediately above, below, and to the left of the starting square all have the same G score of 10. The diagonal squares have G scores of 14.
The H scores are calculated by estimating the Manhattan distance to the red target square, moving only horizontally and vertically and ignoring the wall that is in the way. Using this method, the square to the immediate right of the start is 3 squares from the red square, for a H score of 30. The square just above this square is 4 squares away (remember, only move horizontally and vertically) for an H score of 40. You can probably see how the H scores are calculated for the other squares.
The F score for each square, again, is simply calculated by adding G and H together.
4) Drop it from the open list and add it to the closed list.
5) Check all of the adjacent squares. Ignoring those that are on the closed list or unwalkable (terrain with walls, water, or other illegal terrain), add squares to the open list if they are not on the open list already. Make the selected square the “parent” of the new squares.
6) If an adjacent square is already on the
open list, check to see if this path to that square is a better one. In
other
words, check to see if the G score for that square is lower if we use
the current square to get there. If not, don’t do
anything.
On the other hand, if the G cost of the new path is
lower, change the parent of the adjacent square to the selected square
(in the diagram above, change the direction of the pointer to point at
the selected square). Finally, recalculate both the F and G scores of
that square. If this seems confusing, you will see it illustrated below.
[Figure 4]
First, we drop it from our open list and add it to our closed list (that’s why it’s now highlighted in blue). Then we check the adjacent squares. Well, the ones to the immediate right of this square are wall squares, so we ignore those. The one to the immediate left is the starting square. That’s on the closed list, so we ignore that, too.
The other four squares are already on the open list, so we need to check if the paths to those squares are any better using this square to get there, using G scores as our point of reference. Let’s look at the square right above our selected square. Its current G score is 14. If we instead went through the current square to get there, the G score would be equal to 20 (10, which is the G score to get to the current square, plus 10 more to go vertically to the one just above it). A G score of 20 is higher than 14, so this is not a better path. That should make sense if you look at the diagram. It’s more direct to get to that square from the starting square by simply moving one square diagonally to get there, rather than moving horizontally one square, and then vertically one square.
When we repeat this process for all 4 of the adjacent squares already on the open list, we find that none of the paths are improved by going through the current square, so we don’t change anything. So now that we looked at all of the adjacent squares, we are done with this square, and ready to move to the next square.
So we go through the list of squares on our open list, which is now down to 7 squares, and we pick the one with the lowest F cost. Interestingly, in this case, there are two squares with a score of 54. So which do we choose? It doesn’t really matter. For the purposes of speed, it can be faster to choose the last one you added to the open list. This biases the search in favor of squares that get found later on in the search, when you have gotten closer to the target. But it doesn’t really matter. (Differing treatment of ties is why two versions of A* may find different paths of equal length.)
So let’s choose the one just below, and to the right of the starting square, as is shown in the following illustration.
[Figure 5]
This time, when we check the adjacent squares we find that the one to the immediate right is a wall square, so we ignore that. The same goes for the one just above that. We also ignore the square just below the wall. Why? Because you can’t get to that square directly from the current square without cutting across the corner of the nearby wall. You really need to go down first and then move over to that square, moving around the corner in the process. (Note: This rule on cutting corners is optional. Its use depends on how your nodes are placed.)
That leaves five other squares. The other two squares below the current square aren’t already on the open list, so we add them and the current square becomes their parent. Of the other three squares, two are already on the closed list (the starting square, and the one just above the current square, both highlighted in blue in the diagram), so we ignore them. And the last square, to the immediate left of the current square, is checked to see if the G score is any lower if you go through the current square to get there. No dice. So we’re done and ready to check the next square on our open list.
We repeat this process until we add the target square to the closed list, at which point it looks something like the illustration below.
[Figure 6]
Note that the parent square for the square two squares below the starting square has changed from the previous illustration. Before it had a G score of 28 and pointed back to the square above it and to the right. Now it has a score of 20 and points to the square just above it. This happened somewhere along the way on our search, where the G score was checked and it turned out to be lower using a new path – so the parent was switched and the G and F scores were recalculated. While this change doesn’t seem too important in this example, there are plenty of possible situations where this constant checking will make all the difference in determining the best path to your target.
So how do we determine the path? Simple, just start at the red target square, and work backwards moving from one square to its parent, following the arrows. This will eventually take you back to the starting square, and that’s your path. It should look like the following illustration. Moving from the starting square A to the destination square B is simply a matter of moving from the center of each square (the node) to the center of the next square on the path, until you reach the target.
[Figure 7]
1) Add the starting square (or node) to the open list.
2) Repeat the following:
a) Look for the lowest F cost square on the open list. We refer to this as the current square.
b) Switch it to the closed list.
c) For each of the 8 squares adjacent to this current square …
If it is not walkable or if it is on the closed list, ignore it. Otherwise do the following.
If it isn’t on the open list, add it to the open list. Make the current square the parent of this square. Record the F, G, and H costs of the square.
If it is on the open list already, check to see if this path to that square is better, using G cost as the measure. A lower G cost means that this is a better path. If so, change the parent of the square to the current square, and recalculate the G and F scores of the square. If you are keeping your open list sorted by F score, you may need to resort the list to account for the change.
d) Stop when you:
3) Save the path. Working backwards from the target square, go from each square to its parent square until you reach the starting square. That is your path.
Note: In earlier versions of this article, it was suggested that you can stop when the target square (or node) has been added to the open list, rather than the closed list. Doing this will be faster and it will almost always give you the shortest path, but not always. Situations where doing this could make a difference are when the movement cost to move from the second to the last node to the last (target) node can vary significantly  as in the case of a river crossing between two nodes, for example.
Small Rant
Forgive me for digressing, but it is worth pointing out that when you read various discussions of A* pathfinding on the web and in assorted forums, you will occasionally see someone refer to certain code as A* when it isn’t. For the A* method to be used, you need to include the elements just discussed above  specifically open and closed lists and path scoring using F, G, and H. There are lots of other pathfinding algorithms, but those other methods are not A*, which is generally considered to be the best of the lot. Bryan Stout discusses many of them in the article referenced at the end of this article, including some of their pros and cons. Sometimes alternatives are better under certain circumstances, but you should understand what you are getting into. Okay, enough ranting. Back to the article.
Notes on Implementation
Now that you understand the basic method, here are
some additional
things to think about when you are writing your own program. Some of
the
following materials reference the program I wrote in C++ and Blitz
Basic,
but the points are equally valid in other languages.
1. Other Units (collision
avoidance): If you happen
to look closely at my example code, you will notice that it completely
ignores other units on the
screen. The units pass right through each other. Depending on the game,
this may be acceptable or it may not.
If you want to consider other units in the pathfinding
algorithm and have them move around one another, I suggest that you
only
consider units that are either stopped or adjacent to the pathfinding
unit at the time the path is calculated, treating their current
locations
as unwalkable. For adjacent units
that
are moving, you can discourage collisions by penalizing nodes that lie
along
their respective paths, thereby encouraging the pathfinding unit to
find
an alternate route (described more under #2).
If you choose to consider other units
that are moving and not adjacent to the pathfinding unit, you will need
to develop a method for predicting where they will be at any given
point in time so that they can be dodged properly. Otherwise you will
probably end up with strange paths where units zigzag to avoid other
units that aren't there anymore.
You will also, of course, need to
develop some collision detection code because no matter how good the
path is at
the time it is calculated, things can change over time. When a
collision occurs a unit must either calculate a new path or, if the
other unit is moving and it is not a headon collision, wait for the
other unit to
step out of the way before proceeding with the current path.
These tips are probably enough to get
you started.
If you want to learn more, here are some links that you might find
helpful:
2. Variable Terrain Cost: In this tutorial and my accompanying program, terrain is just one of two things – walkable or unwalkable. But what if you have terrain that is walkable, but at a higher movement cost? Swamps, hills, stairs in a dungeon, etc. – these are all examples of terrain that is walkable, but at a higher cost than flat, open ground. Similarly, a road might have a lower movement cost than the surrounding terrain.
This problem is easily handled by adding the terrain cost in when you are calculating the G cost of any given node. Simply add a bonus cost to such nodes. The A* pathfinding algorithm is already written to find the lowest cost path and should handle this easily. In the simple example I described, when terrain is only walkable or unwalkable, A* will look for the shortest, most direct path. But in a variablecost terrain environment, the least cost path might involve traveling a longer distance – like taking a road around a swamp rather than plowing straight through it.
An interesting additional consideration
is something the professionals call “influence mapping.” Just as with
the variable terrain costs described above, you could create an
additional point system and apply it to paths for AI purposes. Imagine
that you
have a map with a bunch of units defending a pass through a mountain
region. Every time the computer sends somebody on a path through that
pass, it
gets whacked. If you wanted, you could create an influence map that
penalized nodes where lots of carnage is taking place. This would teach
the computer to favor safer paths, and help it avoid dumb situations
where it keeps sending troops through a particular path, just because
it is shorter (but also more dangerous).
Yet another possible use is penalizing
nodes that lie along the paths of nearby moving units. One of the
downsides of A* is that when a group of units all try to find paths to
a similar location, there is usually a significant amount of overlap,
as one or more units try to take the same or similar routes to their
destinations. Adding a penalty to nodes already 'claimed' by other
units will help ensure a degree of
separation, and reduce collisions. Don't treat such nodes as
unwalkable, however, because you still want multiple units to be able
to squeeze through tight passageways in single file, if necessary.
Also, you should only penalize the paths of units that are near the
pathfinding unit, not all paths, or you will get strange dodging
behavior as units avoid paths of units that are nowhere near them at
the time. Also, you should only penalize path nodes that lie along the
current and future portion of a path, not previous path nodes that have
already been visited and left behind.
3. Handling Unexplored Areas: Have you ever played a PC game where the computer always knows exactly what path to take, even though the map hasn't been explored yet? Depending upon the game, pathfinding that is too good can be unrealistic. Fortunately, this is a problem that is can be handled fairly easily.
The answer is to create a separate "knownWalkability" array for each of the various players and computer opponents (each player, not each unit  that would require a lot more computer memory). Each array would contain information about the areas that the player has explored, with the rest of the map assumed to be walkable until proven otherwise. Using this approach, units will wander down dead ends and make similar wrong choices until they have learned their way around. Once the map is explored, however, pathfinding would work normally.
4. Smoother Paths: While A* will automatically give you the shortest, lowest cost path, it won't automatically give you the smoothest looking path. Take a look at the final path calculated in our example (in Figure 7). On that path, the very first step is below, and to the right of the starting square. Wouldn't our path be smoother if the first step was instead the square directly below the starting square?
There are several ways to address this problem. While you are calculating the path you could penalize nodes where there is a change of direction, adding a penalty to their G scores. Alternatively, you could run through your path after it is calculated, looking for places where choosing an adjacent node would give you a path that looks better. For more on the whole issue, check out Toward More Realistic Pathfinding, a (free, but registration required) article at Gamasutra.com by Marco Pinter.
5. Nonsquare Search Areas: In our example, we used a simple 2D square layout. You don't need to use this approach. You could use irregularly shaped areas. Think of the board game Risk, and the countries in that game. You could devise a pathfinding scenario for a game like that. To do this, you would need to create a table for storing which countries are adjacent to which, and a G cost associated with moving from one country to the next. You would also need to come up with a method for estimating H. Everything else would be handled the same as in the above example. Instead of using adjacent squares, you would simply look up the adjacent countries in the table when adding new items to your open list.
Similarly, you could create a waypoint system for paths on a fixed terrain map. Waypoints are commonly traversed points on a path, perhaps on a road or key tunnel in a dungeon. As the game designer, you could preassign these waypoints. Two waypoints would be considered "adjacent" to one another if there were no obstacles on the direct line path between them. As in the Risk example, you would save this adjacency information in a lookup table of some kind and use it when generating your new open list items. You would then record the associated G costs (perhaps by using the direct line distance between the nodes) and H costs (perhaps using a direct line distance from the node to the goal). Everything else would proceed as usual.
Amit Patel has written a brief article delving into some alternatives. For another example of searching on an isometric RPG map using a nonsquare search area, check out my article TwoTiered A* Pathfinding.6. Some Speed Tips: As you develop your own A* program, or adapt the one I wrote, you will eventually find that pathfinding is using a hefty chunk of your CPU time, particularly if you have a decent number of pathfinding units on the board and a reasonably large map. If you read the stuff on the net, you will find that this is true even for the professionals who design games like Starcraft or Age of Empires. If you see things start to slow down due to pathfinding, here are some ideas that may speed things up:
7.
Maintaining the Open List:
This
is actually one of the most time consuming elements of the A*
pathfinding algorithm. Every time you access the open list, you need to
find the square that has the lowest F cost. There are several ways you
could
do this. You could save the path items as needed, and simply go through
the whole list each time you need to find the lowest F cost square.
This
is simple, but really slow for long paths. This can be improved by
maintaining a sorted list and simply grabbing the first item off the
list every time you need the lowest Fcost square. When I wrote my
program, this was the first method I used.
This will work reasonably well for small maps,
but it isn’t the fastest solution. Serious A* programmers who want real
speed use something called a binary heap, and this is what I use in
my code. In my experience, this approach will be at least 23 times
as fast in most situations, and geometrically faster (10+ times as
fast)
on longer paths. If you are motivated to find out more about binary
heaps,
check out my article, Using Binary Heaps
in A* Pathfinding.
Another possible bottleneck is the way
you clear and maintain your data structures between pathfinding calls.
I personally prefer to store everything in arrays. While nodes can be
generated, recorded and maintained in a dynamic, objectoriented
manner,
I find that the amount of time needed to create and delete such objects
adds an extra, unnecessary level of overhead that slows things down.
If you use arrays, however, you will need to clean things up between
calls.
The last thing you will want to do in such cases is spend time zeroing
everything out after a pathfinding call, especially if you have a large
map.
I avoid this overhead by creating a 2d
array called whichList(x,y) that designates each node on my map as
either on the open list or closed list. After pathfinding attempts, I
do not zero out this array. Instead I reset the values of onClosedList
and onOpenList in every pathfinding call, incrementing both by +5 or
something similar on each path finding attempt. This way, the algorithm
can safely ignore as garbage any data left over from previous
pathfinding attempts. I also store
values like F, G and H costs in arrays. In this case, I simply write
over any preexisting values and don't
bother clearing the arrays when I'm done.
Storing data in multiple arrays consumes
more memory, though, so there is a trade off. Ultimately, you should
use whatever method you are most comfortable with.
8. Dijkstra's Algorithm: While
A* is generally considered to be the best pathfinding algorithm (see
rant above), there is at least one other algorithm that has its uses 
Dijkstra's algorithm. Dijkstra's is essentially the same as A*, except
there is no heuristic (H is always 0). Because it has no heuristic,
it searches by expanding out equally in every direction. As you might
imagine, because of this Dijkstra's usually ends up exploring a much
larger area before the target is found. This generally makes it slower
than A*.
So why use it? Sometimes we don't know where our target destination is. Say you have a resourcegathering unit that needs to go get some resources of some kind. It may know where several resource areas are, but it wants to go to the closest one. Here, Dijkstra's is better than A* because we don't know which one is closest. Our only alternative is to repeatedly use A* to find the distance to each one, and then choose that path. There are probably countless similar situations where we know the kind of location we might be searching for, want to find the closest one, but not know where it is or which one might be closest.
Further Reading
Okay, now you have the basics and a sense of some of the advanced concepts. At this point, I’d suggest wading into my source code. The package contains two versions, one in C++ and one in Blitz Basic. Both versions are heavily commented and should be fairly easy to follow, relatively speaking. Here is the link.
If you do not have access to C++ or Blitz Basic, two small exe files can be found in the C++ version. The Blitz Basic version can be run by downloading the free demo version of Blitz Basic 3D (not Blitz Plus) at the Blitz Basic web site.
You should also consider reading through the following web pages. They should be much easier to understand now that you have read this tutorial.
Some other sites worth checking out:
I also highly recommend the following books, which have a bunch of articles on pathfinding and other AI topics. They also have CDs with sample code. I own them both. Plus, if you buy them from Amazon through these links, I'll get a few pennies from Amazon. :)
Well, that’s it. If you happen to write a program that uses any of these concepts, I’d love to see it. I can be reached at
Until then, good luck!